Florida Commercial Glass Codes and Regulations
Florida has one statewide building code, and it is strict on wind. Here is what it means for storefront, curtain wall and entrance glass.
Last reviewed October 29, 2026
Home / State Regulations / Florida
Florida at a glance
| Topic | Florida |
|---|---|
| Building code | Florida Building Code, statewide. 8th edition (2023) now, 9th edition (2026) effective December 31, 2026. |
| Product approval | Windows, exterior doors, panel walls and similar products need Florida Product Approval or local approval. |
| HVHZ | Miami-Dade and Broward counties are the High-Velocity Hurricane Zone, with stricter testing. |
| Energy code | Florida Building Code, Energy Conservation volume. |
| Watch for | Impact-resistant glazing or approved protection in wind-borne debris regions. |
One statewide code
Florida adopts a single Florida Building Code (FBC) for the whole state, with volumes for building, energy, existing buildings, accessibility and more. The 8th edition (2023) is in effect now. The Florida Building Commission has set December 31, 2026 as the effective date of the 9th edition (2026). Miami-Dade County has said applications submitted after 4 PM on December 30, 2026 through its online portal must comply with the 2026 edition.
If your project is in design now, ask your designer which edition the drawings will be reviewed under, since the change lands at the end of the year.
Product approval
Under section 553.842 of the Florida Statutes, building envelope products such as windows, exterior doors, panel walls, skylights, shutters and impact protective systems must have Florida Product Approval or a local product approval. Permit applications usually list the approval number for each product. Inspectors may also ask to see the approved installation details on site.
A Miami-Dade Notice of Acceptance (NOA) is a separate local approval. Do not assume an NOA and a state approval are the same document. Check which one the building department asks for.
Wind, impact and the HVHZ
Much of coastal Florida is a wind-borne debris region, where glazing must be impact-resistant or covered by approved protection. Miami-Dade and Broward counties form the High-Velocity Hurricane Zone (HVHZ), which has its own stricter testing and approval rules. For storefronts, that usually means laminated impact glass in a tested frame, with anchoring that matches the approval exactly.
Licensing
Florida licenses construction contractors through the Construction Industry Licensing Board (Department of Business and Professional Regulation), and many counties also issue local certificates of competency for specialty trades. Confirm the glazing contractor’s license for your scope and county before work starts.
Florida storefront project checklist
Before you order glass or pull a permit, confirm:
- Which FBC edition your plans will be reviewed under (8th or 9th)
- Florida Product Approval or local approval number for every window, door and storefront product
- Impact glazing or approved protection in wind-borne debris regions, and HVHZ rules in Miami-Dade and Broward
- Approved installation and anchoring details available on site for inspection
- Contractor license for the scope and county
Looking for glass services in Florida? See our Florida commercial storefront glass page.
Florida commercial glass regulations: FAQ
When does the 9th edition Florida Building Code take effect?
The Florida Building Commission has set December 31, 2026 as the effective date for the 9th edition (2026).
Do storefront products need Florida Product Approval?
Windows, exterior doors, panel walls and similar envelope products need Florida Product Approval or a local product approval under section 553.842. The permit usually lists the approval numbers.
What is the HVHZ?
The High-Velocity Hurricane Zone is Miami-Dade and Broward counties. Products and installations there must meet stricter wind and impact testing rules.
Sources
Last reviewed October 29, 2026. Codes change often, and cities and counties add their own amendments. This page is general information, not legal or design advice. Confirm the rules for your project with the local building department and your design professional.
Planning a commercial glass project in Florida?
Tell us the address, what you are replacing or installing and your timeline. We will help you work out the next step.


